Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Quad 18650 Box Mod por M3HHHH no Thingiverse

Descrição

Quad 18650 Box Mod!!

There is a plain version or a version with Bassnectar's logo embossed on the side.

This box-mod will contain 4 18650 batteries in parallel in order to quadruple the amp limits and the mAh ratings of the batteries in it. This will significantly reduce the voltage drop as the batteries die and allow use of coils down to 0.1 ohm, 0.08 can be achieved if using batteries with a 30 A limit.

The parts can be ordered here but you will need to purchase another battery sled (or 3D print one!) to accommodate 4 batteries.
http://www.amazon.com/Mosfet-Resistor-Connector-18650-Battery/dp/B00UC2VRGC/ref=sr_1_4?ie=UTF8&qid=1441337787&sr=8-4&keywords=mosfet+box+mod&pebp=1441337784775&perid=1W2QJ8Q6FW83CWX5C2RS

The diagram shows how to connect all of the parts together. I recommend that all of the connections are soldered or crimped together. Only attempt assembling this if you are confident in your ability to do so, otherwise find a friend who is.

Make sure you re-scale it to match the dimensions in the picture or else it will be super small.

Any suggestions or comments are much appreciated because this is still a work in progress. Please post all makes and remixes.

Instruções

Make sure you re-scale it to match the dimensions in the picture or else it will be super small.

This box-mod will contain 4 18650 batteries in parallel in order to quadruple the amp limits and the mAh ratings of the batteries in it. This will significantly reduce the voltage drop as the batteries die and allow use of coils down to 0.1 ohm, 0.08 can be achieved if using batteries with a 30 A limit.

The parts can be ordered here but you will need to purchase another battery sled (or 3D print one!) to accommodate 4 batteries.
http://www.amazon.com/Mosfet-Resistor-Connector-18650-Battery/dp/B00UC2VRGC/ref=sr_1_4?ie=UTF8&qid=1441337787&sr=8-4&keywords=mosfet+box+mod&pebp=1441337784775&perid=1W2QJ8Q6FW83CWX5C2RS

The diagram shows how to connect all of the parts together. I recommend that all of the connections are soldered or crimped together. Only attempt assembling this if you are confident in your ability to do so, otherwise find a friend who is.

Thingiverse

Quad 18650 Box Mod

55
Curtidas
0
Downloads
72
Coleções
Tags
18650 510 bassnectar batteries battery box mod E-Cig Ecig mech mod mod
Licença Creative Commons - Attribution - Share Alike
Arquivos (3)
4_Battery_Box_Mod_Case.stl 311.5 KB
4_Battery_Box_Mod_Case_Bassnectar.stl 570.2 KB
E-Cig_Door.stl 1.6 KB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta