For whatever reason, Kezat's original holder was far too loose for me, so I remixed his design into my own, albeit not as pretty. It holds all the keys snugly, so they won't rattle around when your CB is printing.

• Sliced with Craftware v1.10
• Printed with red BotFeeder PLA at 210C
• 0.2mm layer height
• 0.48mm extrusion width
• 3 loops, 3 top and bottom shells
• 10% infill, square grid
• 0.6mm retract/prime length
• first layer: 0.2mm, 70% extruder adjust, 20mm/s
• 40mm/s draw speed
• fan on
• no supports