Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este

Modelo 3D Robot Tank Base por tslove28 no Thingiverse

Descrição

A general base to use for robotics projects etc. To keep the cost down it doesn't use any bearings. The tracks are assembled using Brad nails. The axles are 1/4" aluminum round stock from Home Depot.

I'll get together a list of the remaining screws in a couple of days.
http://youtu.be/FrggtWnwNds

Update: Added Modified Side panel to direct mount the motor using Pololu Hex wheel adapter. Added modified sprocket that works with the Hex wheel adapter.

Instruções

You'll need to print 37 of each track pad (left,right)
74 of the outer pins, and 37 of the center guide.
Repeat this for the second track.

More to come.

Thingiverse

Robot Tank Base

tslove28

129

Curtidas

0

Downloads

179

Coleções

Tags

robotics tanks tracks

Licença Creative Commons - Attribution - Non-Commercial

Arquivos (20)

Chasis_-_Bottom_Panel.stl 50.3 KB

Chassis_-_Front_plate.stl 66.8 KB

Chasis_-_side_Frame.stl 199.9 KB

track_-_pad_R.stl 110.2 KB

Track_-_Center_Guide_Pin.stl 47.2 KB

track_-_outer_compression_guide.stl 45.2 KB

Drive_-_idler_R.stl 163.2 KB

track_-_pad_L..stl 110.2 KB

Drive_-_Motor_tie_down.stl 13.9 KB

Drive_-_Motor_Mount.stl 80 KB

Drive_-_Sprocket_R.stl 179.4 KB

Drive_-_Tensioner.stl 67.7 KB

Drive_-_idler_L.stl 175.4 KB

Drive_-_sprocket_L.stl 208.6 KB

drive_-_Axle_Pin.stl 50.1 KB

Spur_Gear21.ipt.stl 106.2 KB

Spur_Gear11.ipt.stl 99.1 KB

Drive_-_sprocket_L-hex_WA.stl 184 KB

Drive_-_Sprocket_R-hex_WA.stl 184.7 KB

Chasis_-_side_Frame_Direct_Mount.stl 179.8 KB

Ver no Thingiverse

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.