Camera case project for Raspberry Pi.

1. Additional parts:
   • M3 screw (10 mm) – 4 pieces
   • M3 screw (16 mm) – 6 pieces
   • M2 wood screw (9x16 mm) – 4 pieces
   • M12 choke – 1 piece
   • M3 nut – 10 pieces
   • Raspberry Pi (v1 or v2)
   • Raspberry Pi camera module (37x37 mm external size)

• WiFi micro-USB card or Ethernet cable (in this 1 extra hole for an Ethernet cable needs to be done and 1 extra M12 choke needed)
• Power lead 5V (can be USB)
• Plexiglas (40x40 mm)
• Silicone glue (100-200 ml)

2. 3D printing:
   Print all of the parts in positions like on the attached files.

• After print some edges needs to be adjusted by using paper knife or sandpaper
• M12 choke hole needs to be drilled using fi-3 drill bit and then fi-12
• Refine fi-3 printed holes by drilling them

Put it all together in accordance with the attached photo. Lens cap and front window can be sealed using silicone glue (optionally).