A stand alone raspberry pi tablet works on battery power anywhere you need it. Has a glowing Raspberry on the back to show off your Raspberry pi Awesomeness while you click. It has a door for replacing the SD card and storage for 2 additinoal SD cards to allow for multple interface choices. Touchscreen is still not quite right so you have to calibrate the screen before you put it all together.(https://learn.adafruit.com/ar1100-resistive-touch-screen-controller-guide/calibrating-the-ar1100) I can work on instructions and a more complete list of parts and how to put them together.

List of items inside:

9" Touchscreen (Updated 6/16/15)
http://www.sainsmart.com/raspberry-pi/sainsmart-hdmi-vga-digital-9-9-inch-touch-screen-lcd-driver-board-for-raspberry-pi.html

Enerplex JUMPR MAX 10,000 mAh Portable Power Bank
http://www.amazon.com/EnerPlex-JU-MAX-BK-Jumpr-Max-Black/dp/B00I9JJVJU (desolder the USB plugs and solder wires in its place. Barrel Plug for USB hub and Micro USB male for RPi)

Weatherproof Metal On/Off Switch with Blue LED Ring - 16mm Blue On/Off
http://www.adafruit.com/products/915

Resistive Touch Screen to USB Mouse Controller - AR1100
http://www.adafruit.com/products/1580

Raspberry Pi Model B 512MB RAM (Removed RCA video plug)
http://www.adafruit.com/products/998

USB cable - 6" A/MiniB
http://www.adafruit.com/products/899

Lindy Cromo HDMI Male to HDMI Female 90 Degree Right Angle Adapter - Right (41507)
http://www.amazon.com/gp/product/B00CW7ZHDO/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Your Cable Store HDMI Male To Male Adapter Gold Plated
http://www.amazon.com/gp/product/B002LC4Z4M/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

Belkin High-Speed USB 2.0 7-Port Mobile Hub
http://www.amazon.com/Belkin-High-Speed-USB-7-Port-Mobile/dp/B000SDZ0K4/ref=sr_1_6?s=electronics&ie=UTF8&qid=1430704277&sr=1-6&keywords=Belkin+7+Port+USB+2.0+Hub

ReTrak Retractable Dual-Tip Micro and Mini USB Cable, Black (ETCABLEREAD)
http://www.amazon.com/ReTrak-Retractable-Dual-Tip-Micro-ETCABLEREAD/dp/B00CY8IDLY/ref=sr_1_1?s=electronics&ie=UTF8&qid=1430704514&sr=1-1&keywords=Retrak+Dual-Tip+Micro+and+Mini+USB+Cable

Prime Wire & Cable NLFL2P Flat Panel LED Night Light, 2-Pack (disected to remove led, resistor and reflective back and opaque front) These were then wired into the 3.3 volt output of the RPi.
http://www.amazon.com/Prime-Wire-Cable-NLFL2P-2-Pack/dp/B00EAK7HCA/ref=sr_1_19?ie=UTF8&qid=1433904028&sr=8-19&keywords=blue+led+nightlight

Kootek Aluminum Heatsink set for Raspberry Pi - Set of 3 Heat Sinks
http://www.amazon.com/gp/product/B00C8NNZ36?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s01

The 2 USB dongles are for wifi and a Logitec Keyboard/mouse these can be any applicable brand that has a small usb dongle.

All USB and the straight HDMI plug have the casing cut off of the plugs to reduce their size. I then used heatshrink to cover the plugs again to avoid shorts and provide and cables some support.

Onscreen Keyboard Setup
http://ozzmaker.com/2014/06/30/virtual-keyboard-for-the-raspberry-pi/