As with grabercars original but now with pegboard and 1u rack mount equipment support. Now if you want to mount a 1u piece of equipment to pegboard plus a whole lot more. The Improved Parametric Mounting Bracket is completely parametric, having 15 customizable parameters and five options.

Are you trapped in a situation where you need to mount something to something else, have no clue how, and both things conveniently have two surfaces that are perpendicular to one another? Well my friends, you are in luck!

Thanks to grabercars for the bulk of the work!

IMPORTANT: Download and modify the SCAD file! It's likely that the STL file is useless to you. Read the SCAD for pointers and usage tips.

Four configuration mode settings:

1. Single hole
2. Horizontal slot
3. Vertical slot
4. Vertical and horizontal slot

Four bracket base parameter settings:

1. Thickness
2. Mounting bolt diameters
3. Gap to upright portions of bracket
4. Space between slot and edges

Six bracket upright parameter settings:

1. Thickness
2. Mounting bolt diameters
3. Horizontal lot length
4. Vertical lot length
5. Space between slot and edges
6. Space between bottom of bracket and slots in upright

Angled support parameter to set thickness

Five option settings:

1. Slot base (instead of holes)
2. Pegboard length
3. 1U Rack Mount height
4. Supports to top of upright
5. Mirrored part

Just open the SCAD file in any compatible program and change the settings at top of file.

This thing is a Work In Progress. Improvements on the hole placement may come with feedback!