Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este

Modelo 3D Ceramic Delta Printer por thefatcreature no Thingiverse

Descrição

Large delta printer for ceramic extrusion.

Extruding clay:
https://vimeo.com/128022387
Homing:
https://vimeo.com/128063275

Instruções

Larger delta printer for extruding clay. The Moineau Pump extruder is capable of controlled volume per motor step.

Uses:
1/2 in diameter rods for the towers.
Nema 17 60mm stepper motors for each axis
Nema 17 34mm stepper motors for the extruder
5mm diameter rods for the arms
608 skate bearings for the carriages

Clay recipe used:
35% kaolin
25% ball clay
20% nepheline syenite
20% silica

Add: deflocculant about 1% (sodium silicate, soda ash, or darvan 7)

Thingiverse

Ceramic Delta Printer

thefatcreature

254

Curtidas

0

Downloads

303

Coleções

Tags

3d printer ceramic clay delta

Licença Creative Commons - Public Domain Dedication

Arquivos (21)

moineau_stepper_motor_coupler.stl 113.3 KB

moineau_stepper_shaft.stl 142.4 KB

moineau_stepper_nozzle_small.stl 356.3 KB

stepperSpacerSeal11.stl 77.1 KB

41mm_shaft.stl 74.7 KB

platform.stl 390.1 KB

moineau_stepper_rotor_small_coupled_cl04.stl 1.8 MB

belt_holder.stl 1.9 MB

right_side_carriage.stl 4.1 MB

back_side_carriage.stl 3.6 MB

endstop.stl 1.8 MB

moineau_stepper_stator_small.stl 5.1 MB

jaws.stl 42.1 KB

idler_end_V1.2.stl 303.4 KB

joint_repaired.stl 46.9 KB

moineau_stepper_inlet.stl 805.7 KB

extruder_right_holder.stl 4.5 MB

left_side_carriage.stl 4.1 MB

extruder_left_holder.stl 4.6 MB

center_carriage.stl 13.1 MB

motor_end_large.stl 545.6 KB

Ver no Thingiverse