My spice rack couldn't hold all of my spices, so I decided to make my own.

This file will generate a cut pattern for a laser cutter which will assemble into a spice rack. It was designed with 1/4" material in mind but it will adjust itself reasonably well if you use something else.

eps file parameters [at top of file]
-------------------------------------
material_thickness: how thick your input material is [matters for connections]
num_sides: the number of side pieces to render
num_beams: the number of beams to render
num_bottles_per_shelf: the number of bottles to fit on each shelf
num_shelves_high: the number of rows the spice rack will have

bottle_height: the height of your largest bottle plus a healthy margin
bottle_width: the width of your largest bottle as it faces you plus a margin
bottle_depth: the depth of your largest bottle plus a healthy margin

rack_beam_width: how wide each beam should be
laser_beam_width: for fine adjustment in the cut holes [affects tightness]

cut out at least 2 sides and as many beams as needed to connect them. I used wood glue to ensure it all stays together.