Unlike similar designs this alignment bracket was designed to print without support or raft.

You will know you need it the first time it happens to you. Let Makersome help before it’s to late. You will be kickin yourself when the filament jumps the spool and wraps around the holder, not allowing it to feed properly, having your extruder head moving around and nothing coming out. With this easy to print project you can have trouble free prints.

Instructions:

1. Download the STL file for the Filament Alignment Bracket

2. Pop it into your slicer of choice

3. We recommend using PLA with extruder setting of 200°C

4. If you do not have a Glass Bed Upgrade Kit then we recommend not to use a heated bed, but if you do have the Glass Bed Upgrade Kit then we recommend using a bed temp of 70°C

5. You do not need to use rafting or supports while printing this project

6. Load your project onto an SD card or connect your computer to your printer (just use your preferred method here)

Congratulations, you're ready to print!

For more fun 3D Printing Projects check out Makersomes Project page http://makersome.com/3d-printing-projects/