This is a mini lathe for coloring eggs. It is parent driven, and tooling is controlled by children. Happy Easter!

Print all pieces with 2 shells and 10% infill.

You will need to print out two egg_holder2.stl files.
All posts should be printed with support. These were the only pieces we printed with support. Helper disks on the slider.stl file and the gear_house.stl are recommended to prevent warping. All posts fit through corresponding pieces. See picture for assembly. A small wood screw fits into the back hole on the slider mechanism to lock it in place on the ways. Ways should be glued into the gear house.

We also recommend using a little two sided mounting tape in the inside of the egg holders to prevent slipping.