This is a mount for a Dropcam for the TAZ 5. It clips onto the front bracket of the Y Axis and has adjustable camera angle. This gives me a better view of the print then the typical top down view.

STLs are attached and the parametric model is hosted on OnShape where you can get a free account.

https://cad.onshape.com/documents/2d9c471e578b4fdc8b66f18c/w/4f9d918ed7ca41e99775d3be/e/65c4442b42054040a908ae7a

Print 2 Right Side Plates, 1 Mount, and 1 Bottom Support.

I print everything flat except the Bottom Support, which I print oriented with the top edge on the plate. This way you don't need support.

Then you link the Side plates into the Bottom Support, press fit is tight but solid. Next insert the Mount into the holes and slots. Feel free to use a 3mm bolt and washer to secure the angle of the camera. The fit is snug enough that I don't think it is necessary, but the holes are there if you need them.