A challenge coin display for military Makers or anyone else who collects these coins.

Holds approx. 25 coins. First row is 1mm wider for thicker coins. Measures 9'' x 7'', or 22.9cm x 17.6cm if you're a communist. Included in the files is a 4-part version for small print surfaces.

Updates:
3/30/2015: Fixed feet to use less plastic, fit into NE and NW sockets better. Fixed NE piece, S pegs to be a full 6mm and insert into the N sockets of the SE piece.

4/3/2015: Made the display prettier by beveling the edges. Changed feet style. Refined pegs to make pieces fit more flush. Now uses less plastic!

Print in one piece w/ feet separate, or print the quarter-pieces if you have a small printing surface. 20% infill w/ supports touching buildplate (to support the pegs). The pegs may need some sanding/filing to fit in the sockets but they are a good fit and glue should not be necessary.

3/30/2015: Recommend using a top and bottom thickness greater than 0.3mm or 3 layers, possibly 5 will give the piece a smoother appearance on the top. Use a 2-3 layer wall thickness to avoid the banding seen in my print. Some light sanding of the surfaces will appear to give it a pleasant smooth matte finish, if you want to go that far.