This is a highly adjustable Mini-Z autoscale dummy. You can adjust height, length, width and camber.

It needs the following hardware: 5x M4 countersunk 16mm long bolts 4x M4 self-locking nuts 1x M4 regular nut 4x M2 12mm bolts (this is what acts as axle in the hub) 4x M2 8mm bolts (pivot point for the hub) 4x M2 regular nut 4x M2 self-locking nuts for the wheels or kyosho original ones

Arms will need the hole to be M4 tapped, ideally with a tap but you can get away just using a bolt if you use PLA or similar. Use the desired hub depending on rim type you are going to use. Provided holes to attach to any Kyosho autoscale case.