Hi, normally I wait til i've finished a project before uploading it to Thingiverse but this time I thought I'd put the models up as I do them. This is an ongoing project so I try to keep adding more bases.

These are little 2mm models - from feet to head if they werent wearing a hat ;) - on a 1 inch by 1/2 inch base 2mm thick for playing Rod Humble's popular wargame rules "2 by 2 Napoleonics" I struggle to pick up anthing thinner than 2mm but you can resize the thickness of the base in your slicer very easily. I print these directly on the buildplate and clean up the base with a knife/sandpaper.

I have designed these to be printed on a resin printer. A 0.2mm nozzle on a modern FDM printer may get you something useable, I'd probably print them at 150% for a better result.

These are very simple models but hopefully they will allow people to put large armies together in a short period of time.

Rod has generously made his rules completely free at https://www.rodvik.com/2by2/vthree/ There is a great 2x2 Napoleonics fan page on facebook https://www.facebook.com/groups/1393796442405443

If you like these models and you can afford to please consider leaving a tip at @ https://buymeacoffee.com/wozname