I made some wooden stairs to use for the Frosthaven overlay!  Of course, I wanted them to be useful for more than just Frosthaven, so I made them to fit inside a standard 1 inch square for TTRPGs like D&D and Pathfinder.  I also made a Stand to go under the stairs, in case you want more elevation than a single square of stairs will give you (and yes, those stands nest so that they can go on top of each other for even more height!).  The final cool detail is that I spaced out the steps so that a miniature should be able to stand on the second step while it's in a space with stairs!

The wood grain makes for some thin spots that larger nozzles might have trouble with, so I've included plain versions of both the stairs and the stand.  That'll also let people paint them to look like marble or whatever other texture you might need!

Important Note: These models are designed to be printed at a 45 degree angle with support material holding them in place.  This printing angle will let the woodgrain texture show up better (since it won't be on a top surface), will significantly reduce bridging, and, for the stand, will create solid loops in the "hook" so that it is less likely to break after repeated use.  Since that angle leaves a tiny little footprint, I added a bunch of support on the underside of the stairs and got them to print out just fine that way.

As always, the .blend file and pre-supported .3mf (including the one that I used to print this on my Prusa MK3, although the support points should work for SLA printers) for this model are available to my patrons at https://patreon.com/VirtuallyJason. If you appreciate my work and have a few dollars to spare each month, please consider joining!