This design provides for a configurable cylindrical container with a screw on top. You mainly specify the internal radius and height using the OpenSCAD Customizer window. You can also specify additional options, including:

1. Text on the top cover, with up to three lines of text
2. A wider lip for the connection between the top and bottom for a better seal
3. A slot in the top cover for a gasket (you can also use a gasket without the slot)
4. Gaskets (print with TPU)
5. Grips on the top cover for easier opening and closing
6. Side text running vertically from top to bottom, with inversion option (i.e. embedded or protruding) and you can specify between 1 and 6 copies to be placed around the circumference
7. Secondary line of side text, where the angle offset from the main side text is adjustable
8. Adjustable 'smoothness' for the cylinder walls (i.e. control of the number of facets on the cylinder)
9. Option for embedded image on top cap

You can then optionally print a gasket using TPU. You would otherwise use PLA, PETG or ABS for the top and bottom of the container.

While a few example STL files are provided, it is intended that you generate STL files that meet your specific needs.

I anticipate adding more optional features and examples here over time.