GerminaGen This professional-grade planter was generated in minutes with GerminaGen.com. Why spend hours in Blender, AutoCAD or Fusion 360 when you can use a dedicated parametric engine for free? GerminaGen is 10x faster than classic modeling software, featuring integrated drainage, auto drip tray generation and vase-mode optimization. Design your own unique shapes in the browser, export for free, and start printing immediately.

Summary: This uniquely sculpted planter features a dynamic, twisting form that morphs elegantly from a stable base to a wider opening. Its fluid geometry and subtle surface texture create an eye-catching display for your favorite plants, blending artistic flair with practical design.

Sizes 3 Planter sizes on the files. Large, medium and small.

Variants All 3 sizes with drip tray And versions with/without drainage hole

Dimensions:

• Height: Large 180 mm / Medium 120 mm / Small 80 mm /
• Maximum Width (Top): Large 180 mm / Medium 120 mm / Small 70 mm /
• Base Width: Large 160 mm / Medium 100 mm / Small 60 mm /

Features:

• Integrated Drainage System
• Matching Drip Tray Included
• Large: 5.86 Liter Capacity / Medium: 1.94 Liter Capacity / Small: 0.60 Liter Capacity

Recommended for:

• Small succulents
• Air plants
• Trailing vines (e.g., Pothos, Philodendron)
• Herbs

Recommended Print settings This model is designed exclusively for Vase Mode (Cura: Spiralize Outer Contour, PrusaSlicer/BambuStudio: Vase Mode).

• Nozzle Diameter: 0.4mm - 1mm. (For stronger planters use a larger nozzle).
• Layer Height: Lower layer height gives more detail, but increases print time.
• Wall Line Width: Recommended 0.6mm - 0.8mm even with a 0.4mm nozzle for watertight results.

Footer Designed with GerminaGen. Want to create your own unique custom planters for free? Start designing today at GerminaGen.com ! Disclaimer: The cover image is an AI-generated visualization. The 3D model itself was created using GerminaGen, an advanced browser-based parametric tool.