Easy on/off universal cuff for those with limited mobility to help hold phone without grasp. The design allows for the use of a universal cuff, while still being easily removeable for MagSafe charging on iPhones. Even if you don't have a MagSafe compatible phone, a self adhesive magnetic ring can be applied to the back of the phone or phone case.

2 versions shown (Velcro Adjustable and Rigid half Cuff). Third Version with full rigid cuff will be uploaded in the near future

• Video Showing the different versions - https://youtube.com/shorts/2PSiCz4LxP4?si=IrVVv_7tEQJA6D9_

Parts Required - Search Amazon with the following description for the MagSafe part used in this design - "Sticky Magnetic Phone Mount Compatible with Magsafe 16 15 14 13 12 Pro Max Mini Car Mount and Wall Mount Soft Silicone Front" Brand on Box "QUARBLE" This also come with the self-adhesive magnetic ring if needed.

One Wrap Velcro Brand (adheres to itself) = 3/4" wide velcro - slot is 21 mm wide

Assembly - See attached pictures as reference

1. Remove the silicone sleeve to access the ring magnet
2. Discard the black disc
3. Place the ring magnet with the lines facing out (see picture)
4. Place silicone sleeve over the 3D printed part

3D printing Recommendations

Velcro Adjustable Version

• PLA or PETG -50% infill Rectilinear -Print as oriented - Support on bottom only **If your slicer has the option, choose "build plate only" for support to prevent the velcro slot from being filled in with support. Other options include allowing support, but just taking the time to remove it. Or manually block support in this area in the slicer

Rigid Half Cuff Version (Glue vs No Glue versions) -50% infill Rectilinear -Print as oriented

• NO GLUE - both files have dimples, snaps together - very tight tolerance, required some force to connect
• GLUE - Files without dimples, add super glue, slide together