Remix of the original by PsykO

1. Made the Drawers longer and the Tray longer.
2. Included a entry point for "Poop" to be sent into the Lower Drawer

• please be aware that this collection style may not be suitable for long term poop farming.
• keep an eye on your poop horde, and determine for yourself how long you feel happy to go between clearing the lower tray.

3. A basic Chute for the Poop.

• I have included a version 4 for the Chute, as some have had issues with the lower section being to close to their power cable.
• v4 is a single piece (rather than split in the middle) with a removable top funnel.
• I am currently printing this to check for any blockage issues.

UPDATE *** I have printed all parts and they fit nicely (be patient fitting the trays together. I made them that snug for a reason)

I've only used 2 wall loops & 5% infill for all the supports. Using Matte PLA

I could add a fillet around the cut-out ovals on the drawer bottom flat area, as there is a VERY minor catch by the tray joins, as the bottom tray slides in, but not enough to cause an issue.

The bottom tray is slightly tighter going in, without being remotely an issue (likely due to touching on the lip that supports the upper tray from the OG design), but i prefer this as it means the tray wont move from vibrations causing you to have to finger the poop out from the depths of the rear.

AD5XBaseL+R_Sides_-_AD5XBaseL+R_Sides.stl must be printed twice for the left and right sides.