This is a parametric dowel bracket. The screw holders are printed separately to prevent the bracket from splitting if the screws are overtightened.

The example provided is designed for #8 wood screws, 1.5 inches in length, with a 12 cm distance between the center of the dowel and the back of the bracket. The DowelStopper parameter controls whether the bracket has a closed side or remains open.

Support material is not required. An infill of 30% is recommended.

This object's main web page is: https://www.ctheroux.com/parametric-dowel-bracket/.

This object was designed using openSCAD.