Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Ground Spinner firework wing por Ncy_ no Thingiverse

Descrição

Wings for 15mm Ground spinner firework (F1)

Video:https://youtube.com/shorts/p3dUSj7aijU?feature=share These DUM BUM ground spinners were pretty weak but still flew 4-5m high

For added effect use ground spinners that have crackling at the end

BE AWARE: -- Mount the wings as shown in the pictures -- Use the smallest zip tie (2 mm wide, 1 mm thick) -- Reusable — place the used one next to the new one and simply slide the wings over; no need to cut the zip tie -- Orient the connector part of the zip tie on the bottom; this helps the ground spinner rotate -- Angle the nozzle downward 5–10 degrees, but test this for yourself -- Read the print settings -- Have fun!

Thingiverse

Ground Spinner firework wing

2
Curtidas
0
Downloads
1
Coleções
Tags
firework Fireworks fireworks launcher Ground spinner Ground spinner firework
Licença Creative Commons - Attribution - Share Alike
Arquivos (2)
Ground_spinner_wing_2x.stl 28.9 KB
Ground_spinner_wing_1x.stl 15.3 KB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta