12/21/25: Made lots of minor changes to help with consistency in the files. Improved the fit test file for all shapes. This will allow you to fine tune the driver baffle parameters for each driver individually without having to print an entire baffle. Note that the files are for a 1-way configuration and do not match the default pictures anymore.

12/14/25: Corrected issue with drivers not being ordered from top to bottom correctly for 2-way configurations.

12/13/25: Speaker cutout shapes have been corrected. Surface mounting has been enabled, there is a new shape 7 that is adjustable, and a shape 7 test file.

12/8/25: There are a few issues with the baffle not making the speaker cutouts correctly (square, rectangle, cuts). I'm also adding FaitalPro style clipped circle cutouts. I'll try to have the corrections as soon as possible.

** OVERVIEW: **

This is a ** Great Utility for Music Box Optimization (GUMBO)!** It is a fully parametric desktop speaker enclosure system built with OpenSCAD. You will need to download OpenSCAD to use this. It's a lot easier/faster than using the customizer. GUMBO is designed for makers who want precision, flexibility, and professional-grade features without needing expensive CAD tools. It is highly recommended to use WinISD to model speaker enclosures and for port tuning. GUMBO does not support slotted ports.

The project includes: -- Parametric Speaker Enclosure Generator -- Advanced Glue-On Baffle Generator (CORE + FRAME Architecture) -- Tab Slot Generator (for locating the baffle on the box) -- Shape 7 Driver Fit Test (For dialing in the speaker shape before printing the baffle)

These files enable you to generate customized speaker boxes and matching baffles for a wide range of full-range drivers, tweeters, and midranges in 1-, 2-, and 3-way configurations.

** FEATURES: ** ** Speaker Enclosure Generator ** TS-parameter-based sizing Sealed or round ported box modes (port(s) on back panel) Port flares Adjustable height/width/depth ratios Automatic internal volume calculation Per-driver cutouts and screw patterns Optional rear panel with tongue or rabbet joint Countersunk screw support Terminal cup integration Clean, structured parametric code

** Baffle Generator (Core + Frame System) ** ** CORE contains: ** driver cutouts driver recess pockets screw holes optional flush-trim rings ** FRAME contains: ** Selectable edge treatments slot + key locating pockets optimized chamfer/roundover geometry

** Edge Styling Options ** -- Flat -- Chamfered (3/4/5/6/8 mm) -- Front-only Roundover (3/4/5/6/8 mm) -- Auto-thickening enabled when needed ** Flush Trim Rings (1.0–2.0 mm depth) ** -- Polished, machined look -- Adjustable trim margin (e.g., 0.4 mm) -- Supports round and rectangular drivers ** Locating Pockets ** -- Slot (top-left) & key (bottom-right). Looking at back of baffle -- Ensures perfect alignment when gluing the baffle to the box

** HOW TO USE **

1. Open the Speaker Enclosure Generator Enter TS parameters Set width/height/depth ratios Define drivers, cutouts, & offsets (Use debug options to see driver faces) Choose sealed or vented Render box parts to confirm size & configuration (be sure to turn off debug options before rendering)

2. Open the Baffle Generator V2.3 Copy the same TS and ratio parameters Choose edge style: flat, chamfer, roundover Set baffle thickness Set flush trim depth (1.0–2.0 mm) Set trim margin (0–2 mm) Render final baffle

3. Export STL Files Export enclosure body Export baffle Export key and slot

Print with your preferred filament & colors

4. Assembly Use the slot & key to align the baffle Securely glue the baffle to the box. (Use SCIGRIP 16, super glue, epoxy, or any glue that will permanently hold and seal plastics) Install terminals Install a crossover (buy or build one) Wire drivers Enjoy your creation!

All code written with assistance from ChatGPT, (Spock Module)!