This is for mounting a 8bitdo micro game controller on to a bike handlebar, for use in virtual shifting & control of indoor cycling app like Rouvy or Mywhoosh. It's made in 2 pieces due to print orientation and support. Just glue them together with superglue or epoxy. The handlebar mounting piece has a more rounded side, use those and the 2 holes to align them when gluing. The clip-on piece should be printed with support on the plate and with 4 walls. Printed in PLA at .28 with 20% infill.

The controller should be taken off for recharging. I tried making an opening for the USB C charge port, but that weaken the front clip piece too much. An optional way of mounting is to use double sided tape and just tape the handlebar piece to the bottom of the controller, ignore the clip-on piece altogether, and charge on the bike. Actually if using it this way, you can mount just about any mini game controller to a handlebar. Finally, there is a slot to mount the whole thing with a zip-tie.