The minimalist DUNE vase combines a modern bottle shape with two contrasting textures that are in balance. The lower section features fine ribs that give the vase a timeless appearance. For the upper section, you can decide whether you want it smooth or with a soft, organic texture by using the fuzzy skin setting in your slicer.

Place this vase as an eye-catcher on a side table or windowsill, where the unique texture combination comes into its own. The narrow neck is perfect for a few pampas plumes or flower stems, but even without filling this vase is a refined addition to your home. Thanks to its sturdy base and elegant proportions, the DUNE vase is an elegant accent in your space.

Dimensions: 8.8 x 20 cm Print time: 5-8 hours Resizable: yes, in your slicer. 3D Model Type: shelled body Printing technique: FDM / FFF / SLA File type: STL Recommended materials: PLA, PETG, ABS, ASA Print difficulty: easy

Happy printing!

Recommended nozzle diameter and print settings Nozzle diameter: 0.4mm, 0.6mm, or larger Bottom- and top layers: 4 Infill: 5% Perimeters: 2 Perimeter speed range: 25 - 45 mm/s Layer height range: 0.25 mm - 0.4 mm
Extrusion width / wall thickness range: default Fuzzy skin: configure height range modifier in your slicer from 15 to 20cm. Use a point distance of 0.3 mm and a thickness of 0.4 mm. Watertight: is possible, but experimental: print hotter than usual (+10 degrees), use a low layer height (0.1 - 0.15mm) and slower print speed (25 - 30mm/s) for improved layer adhesion.

License info: PERSONAL USE ONLY. 3D printed objects of this 3D model may not be sold or used commercially in any way without an active commercial license. Thank you for your understanding.

Each model takes hours of designing, testing, and refining to get right. If you'd like to 3D print and sell this design commercially, or simply want to support my work so I can keep creating and sharing free designs, please consider joining my Patreon.

Thank you for respecting the time and effort that goes into each creation.