Easy and cheap cyclic build for VR controller. I have made it for a Meta Quest 3 controller, but it should be easy to fit in other controllers also.

Makes it much easier to control cyclic in VR. (MSFS, VTOL VR, Aerofly)

I have made three versions of the cyclic ring. 62 and 82 mm in size and a star around 105mm. I would recommend using the star. Since it gives more stability. The picture shows the small 62 mm one.

Materials used:

• Mop with fixed or adjustable handle
• Elastic band for buttons (approx 40 cm)
• 8 small screws
• 4 hook screws
• Thin wood plate (approx 39x15x0.4 cm)
• 2 pieces af wood (approx 22x2.5x1.5 cm)
• Rubber pipe/tube to hold controller. Diameter 25mm
• Small piece of wood/plastic to hold magnet
• Glue gun
• 2 strong magnets
• (VR controller grip)
• (Black paint)

Total price for me less than 15 euro. (Without the cost of the grip)

See this youtube video for assemble instructions. https://youtu.be/v1qiBn4bli0

The inner hole in the cyclic ring has a diameter of 21.5 mm.

The two screw holes in the cyclic ring neck does not need to be used.

Instead of wood you could draw and print the base i 3d. But I had some wood and screws laying around.

Guess you can also make it without using magnets, but it might be too loose.

Settings: Nozzel 0.4mm Layer height 0.2mm Wall loops 4 Top layers 4 Top thickness 1mm Bottom layers 4 Bottom thickness 1mm Infill 20%