MicroTrackRC by 3Drcnc

The MicroTrackRC is a small 3d printed tracked vehicle. It is designed to be easy to print and assemble and use very cheap readily available electronics but still be a very fun project to build and drive. I printed all the parts on two printers in just two days so if you don't want to print for weeks but still make a fun project combining 3d printing and RC this is perfect!

Watch my Youtube video about the project and the build: https://www.youtube.com/watch?v=0oohyrdZCt8

For more information on the hardware and electronics look at the "MicroTrackRC HardwareV2" included in the download. There are a few diffrent variats of some of the parts. These are organized in separate .zip files in the download. You need to print one of the variants from each .zip file. All other parts also need to be printed once except for the track sections that you need 44 of in total. Since there are a few different variants the hardware can also change so refrence the hardware list for what you need for your configuration. In the hardware list there's also listed what electronics you need and some examples of where you can order them.

The MicroTrackRC is designed to require as little support as possible. The only part requiring support is the cutouts for the track tensioning in the frame. PLA works great for all of the parts using 2-3 walls and 10-20% infill.

If you have any questions don't hesitate to reach out. Join my Discord for faster replies and to discuss with others: https://discord.gg/sNKUmDu8at

Happy printing!

Descrição