This is my design for a Retro Arcade Controller.

Designed in Fusion:

BOM:

4x M4x20 Caphead Screws 4x M4 Nuts 32x Heat Inserts 32x M3x12 Screws 1x EG Starts Controller Set. #4 x 6mm Pan Head Screws

Optional:

Stickers/Vinyl of your choice Rubber Feet.

See below links:

https://www.amazon.co.uk/dp/B075DFNK24?ref=ppx_yo2ov_dt_b_fed_asin_title

https://www.amazon.co.uk/dp/B0CWK4WNW9?ref=ppx_yo2ov_dt_b_fed_asin_title

https://www.amazon.co.uk/dp/B0DMW5SJQ6?ref=ppx_yo2ov_dt_b_fed_asin_title

https://www.accu.co.uk/brass-threaded-inserts/845137-HTBI-M3-BR?uk_google_shopping=1&c=3&msclkid=be8ae1b3bb60102f241c893c275e8cfc&utm_source=bing&utm_medium=cpc&utm_campaign=Shopping%20-%20Zombie%20SKUs%20MM%20UK&utm_term=4581733694692273&utm_content=PL%20-%20Zombie%20SKUs

Assembly Notes:

1. Fit Brass inserts to both sides of both bases.
2. Bolt the two halfs together using an Allen Key. There is a recieving pocket for the Hex Nuts to hold them.
3. Fit both bottom Panels (x16 M3x12 screws)
4. Decorate top panels how ever you wish
5. Fit all buttons, joystick and wires to the top panels.
6. Fit board using the #4 Screws
7. Plug in, load into steam and confirm that the buttons are in the correct holes, as recognised. Check to make sure that the joystick is in the right orientation.
8. Fasten up and complete.

Happy Gaming