Use TPU, preferably 0.6 nozzle

Video 1: https://www.youtube.com/shorts/FZKIXf9nNCU Video 2: https://www.youtube.com/shorts/_bgXucTOz3k

Website: https://www.riverfamily.art/

Bambu Studio / Orca Slicer settings:

Global, Tryton_1:

• layer height: 0.28mm
• line width sparse infill: 0.9mm
• line width walls: 0.65mm
• wall loops: 0
• top shell layers: 0
• bottom shell layers: 0
• sparse infill density: 43%
• Infill pattern: Grid
• Infill anchor: 1000 (unlimited)
• Max infill anchor: 1000 (unlimited)
• Infill direction: 0°
• infill/wall overlap: 90%
• Detect narrow internal solid infill: no
• Speed sparse infill: 18 mm/s
• Reduce infill retraction: no
• Brim type: Outer, 9mm width, 0mm gap
• Enable support: yes, normal, auto, 1°, make a 100x150 support enforcer

Tryton_1_1:

• Walls: 2

Tryton_2:

• Walls: 3

Tryton_3:

• Sparse infill density: 33%
• line width sparse infill: 0.65mm

Filament:

• Retraction: 2.4mm
• Wipe: no
• Z hop: 1.2mm, Normal type
• Max volumetric speed: 4.8 mm^3/s