A modern sculptural vase with sharp edges and soft curves that instantly gives your space a stylish upgrade. This modern vase has a fascinating design where geometric lines meet flowing curves. The vertical ribs run with a subtle twist along the entire vase, creating a beautiful depth effect that brings the design to life. With its striking sculptural form, this vase becomes a real eye-catcher on your coffee table or dresser. Perfect for those who love modern design that goes just a bit beyond the standard vase.

Specifications

Size: 10.2 x 20 cm (scale as you like in your slicer) Weight: 25 - 50 grams 3D Model Type: SOLID body (not hollow, designed for vase mode) Printing technique: FDM / FFF File type: STL Recommended materials: PLA, PETG Recommended slicer: Prusaslicer, Cura, Bambu Studio, Orca Slicer, Creality Slicer, Simplify3D Print difficulty: easy

Recommended nozzle diameter and print settings For sturdy vase mode prints, a larger nozzle (0.8mm+) and thicker extrusion lines (1.0mm+) are recommended. This combination creates a strong, single-walled structure that compensates for the lack of multiple walls and infill.

Slicer setting: vase mode / spiralize outer contours ENABLED Nozzle diameter: 0.8mm, 1mm, or larger Bottom layers: 8 Perimeter speed range: 15 - 30 mm/s Layer height range: 0.3 mm - 0.5 mm Extrusion width / wall thickness range: 1mm, 1.2mm or 1.4mm+ Watertight: is possible, but experimental: print hotter than usual (+10 degrees), use a low layer height and lower print speed for improved layer adhesion.

License info: PERSONAL USE ONLY, unless you have a commercial license.