Snake model with magnet slots for attaching it to the refrigerator or any other surface that a magnet will stick to.

This design is a single piece and requires no supports.

For those who don't want magnet slots in the snake, I've also designed a version without them.

Download the 20% smaller version: https://www.thingiverse.com/thing:7079236

• It's important to know that the version with magnet slots has less flexibility than the normal version.

If you want to fill all the magnet slots (it's optional), you will need:

• 30 pieces of size 6×2 mm: 2 pieces for the head and 28 pieces for the body parts.
• 14 pieces of size 5×1.5 mm: 7 pieces for the neck and 7 pieces for the tail.
• 6 pieces of size 4×1.5 mm for the smaller parts in the tail.

The magnet slots have a tolerance of 0.2mm. You can simply press magnets into place with your finger. The connections are very close together, so don't print at high speeds, as this will reduce the tolerance of both the connections and the magnet slots. if your first layer is too close to the build plate, you might need to clean the slots openings.