Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D the PLNTR por Sailor96 no Thingiverse

Descrição

Counter-top Garden :D
( An easy to run, compact , uncomplicated Aquaponic system )
aka usues NO DIRT!

With: a water pump, some aquarium hardware, a little bit of engineering, and the beautiful power of miracle grow.. the magic of aquaponics is in your hands, AND ON YOUR COUNTERTOPS! You will be able to grow almost anything you'll ever need in the kitchen- from Herbs to Peppers in this simple setup.

This thing is aprox. 249.87mm x 154.07mm x 105.39mm

Instruções

This thing is ready to print! For best quality print at 0.1 (or smaller if you can). Also it's recommended to do 35% infill OR LESS, really anything more is not needed.
Happy Printing

To make this project you'll need:

  • PLNTR & components printed
  • A DC water pump, like this one-
    http://www.ebay.com/itm/310947764443
  • 8mm aquarium tubing (outer dia.)
  • Aquarium rocks
  • Miracle grow
    -T5 Florescent lamp (grow lamp)
    Optional: Grow lamp, hooked up underneath cabinets for extra growth :D

Instructions
First off, print BOTH the PLNTR and its Auto-siphon Pipe, for they are crucial parts in the assembly. OK, take the DC water pump.
With the 8mm aquarium tube, connect the bottom spout from the PLNTR to the 'in' port of the pump. Then, connect the 'out' port of the pump to one or both of the top spouts on the PLNTR. This is how the water will cycle- in through the bottom of the pump, out through the top. Next, take the Auto-siphon tube ( looks liek a little straw ). The short end of the tube will go into the hole, if it does not fit sand down the outer edges with sandpaper. The long end of he tube should be facing downward. Seal the connection with super glue. Now, take the Aquarium rocks and fill the basin to the brim, be careful not to break off the tube. Lastly, fill the container with the proper mixture of miracle grow and water. It should drain to the bottom. Keep filling until the pump can run without strain.

Congrats! you've officially created your very own Aquaponic system!
Now it's ready to plant whatever!!

How the internals work..
https://www.youtube.com/watch?v=ZHaiVhVZ3kM

Thingiverse

the PLNTR

295
Curtidas
0
Downloads
507
Coleções
Tags
CountertopChallenge
Licença Creative Commons - Attribution - Share Alike
Arquivos (2)
makerplant_mini_Auto-siphon_Tube.stl 26.8 KB
makerplant_mini.stl 421.4 KB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta