Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Rotating Disk Drum Sequencer por sebulli no Thingiverse

Descrição

A rotating disk drum sequencer. The patterns are programmed by placing pins in holes.

you need:

  • 2 ball ball bearings 608 ZZ
  • Raspberry PI Zero, eg the Waveshare RP2040-Zero
  • MAX98357A I2S DAC
  • 5x ITR9608
  • 5x Resistor 180R
  • 5x Resistor 4k7 (4700R)
  • Loudspeaker
  • Wire with Dupont connectors
  • 16 4x16mm wood screws
  • M4x20mm screw
  • Wooden plate 240x200x19mm
  • 8mm shaft or pipe (eg aluminium pipe)
  • optional: the weight disk with 448 4mm balls (e.g. from the DM grocery store to clean bottles)

Drum patterns:
https://shittyrecording.studio/
https://github.com/montoyamoraga/drum-machine-patterns

Thingiverse

Rotating Disk Drum Sequencer

sebulli sebulli (abre em nova aba)
6
Curtidas
0
Downloads
6
Coleções
Tags
drum drum sequencer drum set e-drum electronic drums programmable drum sequencer Raspberry Pi Zero sequencer
Licença Creative Commons - Attribution - Share Alike
Arquivos (18)
DrumDisk_Disk_16_48.stl 1.5 MB
DrumDisk_Foot.stl 109.8 KB
DrumDisk_Disk_Weight.stl 2.2 MB
DrumDisk_Pin_4.8mm.stl 102.5 KB
DrumDisk_Pin_4.9mm.stl 102.3 KB
DrumDisk_Marking1.stl 32.6 KB
DrumDisk_Marking2.stl 42.1 KB
DrumDisk_Marking3.stl 51.8 KB
DrumDisk_Marking4.stl 61.8 KB
DrumDisk_Marking5.stl 72 KB
DrumDisk_Housing.stl 58.2 KB
DrumDisk_Finger_Disk.stl 104.6 KB
DrumDisk_Column.stl 109.5 KB
DrumDisk_Arm.stl 243.6 KB
DrumDisk_Pin_Box.stl 33.8 KB
DrumDisk_Speaker_Foot.stl 34.8 KB
DrumDisk_Speaker.stl 479.3 KB
DrumDisk_Pin_4.7mm.stl 102.7 KB
Ver no Thingiverse (abre em nova aba)
Comparar agora