Copyright (c) 2025 Klaus-Hendrik Wolf This work by Klaus-Hendrik Wolf is marked with CC0 1.0. (https://www.thingiverse.com/modwolf)

This design is inspired by inset boxes of different vendors. The base-size is 2 x 2.047 x 2.5 in or 52 x 52 x 62 mm. While this design follows boxes produced by Auer Packaging (https://www.auer-packaging.com/de/en/Insertable-bins-for-assortment-boxes.html) similar boxes are produced e.g. by Sortimo (https://www.mysortimo.us/en_US/Storage-Bins-%26-Boxes/Accessories-BOXXes-%26-Cases/Inset-boxes/Inset-box-height-63/nsetbox-1x1-H63/p/000000006000010903) The raster should make them compatible with a wide range of usages. Most of the time buying makes more sense then printing. But if you want to e.g. vary the height it might make sense to print. So while you can (and should) configure the width and length in base units, i would advice to at least think twice before changing the raster size. The height can be adapted to your liking, though if you want to staple and put them in a standard container, you might want to consider to have the heights of boxes add up to 62 mm.

You have been warned! Now go ahead and mess with the design!!! ;-)

Version 1.0