The guys at Spectrum think I'm just some dumb hick! Support Corncob TV now by printing your very own Corncob TV logo and proudly display the network that brought us Coffin Flop!

This listing includes two versions: a thin version for light applications and a thicker version with a magnet slot so you can slap it on your fridge or toolbox.

🖨️ Print Details

Print at: 100% infill

Layer height: 0.08mm (base layer: 0.2mm) (thin version: 0.16mm)

Magnet Version (includes 8x3mm magnet slot, easily resizable) Print time: 47m | Filament usage: 16.03g

Thin Version Print time: 46m | Filament usage: 8.25g

🎨 Filaments Used

PLA BambuLab Matte Ivory White (TD: 3.5)

PLA BambuLab Basic Indigo Purple (TD: 1.7)

PLA BambuLab Basic Maroon Red (TD: 2.0)

PLA BambuLab Matte Sky Blue (TD: 1.7)

PLA BambuLab Matte Marine Blue (TD: 1.0)

PLA BambuLab Matte Charcoal (TD: 0.6)

🔄 Swap Instructions

Thin Version 1️⃣ Start with Ivory White 2️⃣ At layer #6 (0.56mm) swap to Indigo Purple 3️⃣ At layer #9 (0.8mm) swap to Maroon Red 4️⃣ At layer #12 (1.04mm) swap to Sky Blue 5️⃣ At layer #15 (1.28mm) swap to Marine Blue 6️⃣ At layer #18 (1.52mm) swap to Charcoal for the rest

Magnet Version 1️⃣ Start with Ivory White 2️⃣ At layer #44 (3.64mm) swap to Indigo Purple 3️⃣ At layer #47 (3.88mm) swap to Maroon Red 4️⃣ At layer #50 (4.12mm) swap to Sky Blue 5️⃣ At layer #53 (4.36mm) swap to Marine Blue 6️⃣ At layer #56 (4.6mm) swap to Charcoal for the rest

🛑 Warning: My Hueforge settings disable all fans! Make sure your printer isn’t fully enclosed (keep the door/top cracked) or turn the fans back on to prevent overheating.