Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Armadillo DryBox ======================== Drybox made for Voron 2.4 350
Github page
>###[https://github.com/Gnierat/Armadillo-DryBox](https://github.com/Gnierat/Armadillo-DryBox)
>###[https://www.facebook.com/profile.php?id=100090093557794](https://www.facebook.com/profile.php?id=100090093557794)
BOM
| Component | Qty | Source |
|---|---|---|
| Aluminium Profile 2020 L470 Thread on each end | 4 | V-Slot |
| Aluminium Profile 2020 L230 Thread on each end | 4 | V-Slot |
| Aluminium Profile 2020 L300 holes 10mm from eatch end | 4 | V-Slot |
| Bottom ABS Panel 3mm 484x244 | 1 | Fabertec |
| Top Clear PMMA Panel 3mm 484x244 | 1 | Fabertec |
| Side Clear PMMA Panel 3mm 274x244 | 2 | Fabertec |
| Door Clear PMMA Panel 3mm 242x274 | 2 | Fabertec |
| Back Clear PMMA Panel 3mm 484x274 with holes (DXF) | 1 | Fabertec |
| Corner | 20 | Printed |
| Base | 6 | Printed |
| [a]_Roller | 12 | Printed with supports |
| [a]_Spacer | 24 | Printed |
| [a]_SilicaGel_Box | 6 | Printed |
| [a]_SilicaGel_Lid | 6 | Printed |
| Stand | x | Print as needed. Scale length. |
| Door Hinge | 4 | Printed from Voron Repo |
| Handle A | 2 | Printed from Voron Repo |
| Handle B | 2 | Printed from Voron Repo |
| Latch | 2 | Printed from Voron Repo |
| ECAS04 | 6 | Aliexpress |
| 8mm Stainless Steel Rod L75mm | 12 | |
| 608 Bearing | 24 | |
| 3x6mm Magnet | 8 | |
| M3x8 SHCS | 70 | |
| M3 T-nut | 70 | |
| M5x16 BHCS | 16 |
34
Curtidas
0
Downloads
17
Coleções
Tags
mod
voron
voron2
Voron 24
Licença
Creative Commons - Attribution - Share Alike
Arquivos (7)
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta