Continuing on my quest to reduce the amount of shelf space taken up by Marvel United, this organizer condenses the Multiverse content within the large Kickstarter "Big Box". Even though I included my Multiverse Core content in this box, this design does NOT include storage for the core tokens as it is intended to accompany my OG core box setup.

What this setup specifically holds in my arrangement (all figures include corresponding cards):

• 20 Location Cards
• 29 Villain Dashboards
• Fin Fang Foom Villain Figure
• Stature Hero Figure
• Moon Girl Hero Figure
• 12 Anti-Hero Figures - Including Dark Avengers/Winter Guard (Unique Card Deck Sizes)
• 16 Villain Figures
• Wrecking Crew = 4 Villain Figures + 1 Villain Card Deck
• Skrulls = 4 Villain Figures + 1 Villain Card Deck
• Pet Companions
• All Team Decks
• Equipment/Challenge Mini Cards

Notes: This box will NOT be able to hold EVERY piece of the Multiverse content (there's just too much). I backed at the Omniverse level, and my final box arrangement to contain all of the content was:

1. The Kickstarter Big Box = KS Promo Figures, Secret Wars, World War Hulk, War of Kings, Multiverse Core, Fin Fang Foom
2. Spider-Geddon Core Box = Maximum Carnage + Spider-Geddon + Misc Spider Characters from Big Box
3. Civil War
4. Campaign Decks
5. Multiverse Core Box = 30 "Overflow" characters/cards that I plan to store separately and not regularly use (***I swapped some characters around to my X-men and OG Big Boxes as well)

No supports are required for any of the pieces.

You will need to print 4 copies of MU_Multiverse_BB_Bot8_X4.

In some cases there is room for equipment cards with the main character cards on each plate. Alternately they can be stored in the mini card slot on the Team Deck plates, or tucked between the figures and card holders.

The Top3 sections include shallow trays for holding expansion-specific tokens - i.e. Inhumans, Wrecking Crew, etc.

Fin Fang Foom's wings must be removed for storage, I just rest them in the space between the three big figures.

The base size on the figures has some minor variances - some are particularly tight, some are loose. The locking rings on the plates are tight, but should not damage the minis. I've found over time the plates absorb some moisture and loosen a bit. Sometimes it helps to rotate the mini a different direction (the bases are not always perfect circles). Based on pose, some figures may need to go in specific spots or rotate a particular direction to fit. See photos for where I placed everything.

You will need four 5mm magnets in the PetsBox and four #6 Zinc Plated Flat Washers in the PetsLid to hold them together. (These are the same sizes I've used in all my designs.) The magnet holes can be a bit tight, but can be drilled slightly larger to create a snug fit, allowing the magnets to be superglued in place.

I have included an Alternate Mid5_LEFT plate that modifies one of the spots to hold Crimson Dynamo, who is a 35mm base instead of the standard 30mm. I chose to store my Crimson Dynamo in the overflow box, so have NOT test printed that particular piece.

The arrangement of figures is somewhat flexible (generally constrained to number of heroes/villains/antiheroes), however is limited based on how many cards can fit in each holder. Here is how my breakdown by section went, with limiting factors noted.

Top6 RIGHT = Skrulls (Required), 2 Additional Villain Spots Top6 LEFT = Wrecking Crew (Required), 2 Additional Villain Spots Top3 RIGHT = 2 Anti Heroes, 1 Villain Top3 LEFT = 2 Anti Heroes, 1 Villain Mid5 LEFT = Daken, US Agent, Moonstone + Dark Avengers Villain Cards (Required), 2 Additional Villains Mid5 RIGHT = Red Guardian, Dark Star, Ursa Major + Winter Guard Villain Cards (Required), 2 Additional Anti Heroes* (*** I placed Sentry here due to him having additional Void cards) Mid Team Decks = Half on each side, challenge/equipment mini cards Bot8 = 6 Heroes, 2 Villains (Max Capacity) - Enchantress takes up approx the same space as a hero, Anti Heroes take up the same card space as 1 Villain and 1 Hero (could fit 7 heroes and 1 Anti hero on a plate)

For the location plate I remixed Neophyte's Tree of Life Coaster as a tie-in to Yggdrasil from the Loki series. https://www.thingiverse.com/thing:4584678

If you encounter any issues with the print or have questions/suggestions, let me know!