This is an ITX PC built with an ITX motherboard, specifically the ASRock B550 AC AM4, paired with a Ryzen 7 5700X3D, 32GB RAM, and a Gigabyte RTX 4060 OC LP 8GB.

Cooling Setup: The case features two 92mm fans at the top, which handle most of the system's cooling. I recommend using Noctua fans for better performance. The CPU is cooled by an AXP90-X53, with a custom 3D-printed bracket that allows mounting a 25mm fan instead of the standard 15mm one. Other Details: I used a direct USB 3.0 cable for front panel connectivity. The power and reset buttons are 12x12x3.5mm switches, connected with a simple pin cable, which can be bought anywhere. The temperatures are stable, and I 3D-printed the case in ABS material, then glued it together—so far, no issues. In the future, I plan to make a slightly larger version of the case. Power Supply & Compatibility: This case is designed for an HDPLEX power supply (dimensions: 55x40x200mm). There's a bit of extra space, but not much. Important: This setup was designed specifically for the Gigabyte RTX 4060 OC LP. If you want to use an Asus LP variant, be aware that it is slightly larger and may not fit properly—check dimensions online before purchasing. To print this case, you will need a 3D printer with a build volume of at least 250x250x100mm.

I would like to add that I am currently working on version 1.2, where I will add screws for securing the top panel. I am also working on a larger version that will be modular.ADDED VERSION V2, WHICH INCLUDES THE USE OF M1.2X8MM SELF-TAPPING SCREWS. THIS HAS NOT BEEN TESTED YET.