A platform to mount from the bars of most cages / aviaries.

Made to also mount "Bird Cage Ladder - Short Rung"

Printed on Creality K1 Max with HyperPLA. Should work on most printers with most filaments.

Hardware required: 4 x M4 RivNut inserts 4 x M4 x 15mm screws

Instructions: Print PerunMaster5000.stl at 100%, supports required, recommend auto tree supports - bed only. Remove supports and clean part. Heat inserts with butane torch or soldering iron until just hot enough to melt into the filament you used and fit to base (holes slightly undersized for tight fitment). Fit to cage by placing base inside against bars and secure with bracket and M4 screws on the outside.