This is a larger version of the original MTG clock. I retained the dovetail style, as this is the most secure method. It takes a while to pull out the supports, but it's worth the added stability. I attempted without; it would likely not survive any impact or drop.

The .3mf files (Prusa Slicer) will have the correct filament change depths.

Use supports everywhere

Magic the Gathering Clock 388mm / 15.2"

I used the 12888 Quartz DIY Wall Clock Movement Mechanism Battery Operated DIY Repair Parts Replacement with 4 Sets Hands for the timepiece from Amazon.

Any other timepiece with a shaft of 7.5mm to 8mm in diameter with a length of 5/16/8mm and hands being 91.5mm/2.59" for the minute and 67.5mm 1.96" for the hour hand.

Printed on an Original Prusa i3 MK3S+ with a .4 nozzle and .15mm layer height.

I design as a hobby and to benefit charity. If able, please make any donations to St. Jude Children's Research Hospital.