Misc Notes Convenient storage of the basic Artisan tools, plus a trough for my favorite glue sticks and even a space for the Rotary Module chuck tools. Print the Housing top side down, and the Handle on its front face. I have not yet printed the logoed handle or housing, but will report back when I do. Let me know if you try it.

Wait for the build plate to cool before removing as the glue stick trough floor is very thin and could tear or warp in not cool.

The front tabs of the Housing slip into the gaps in front of the "Y" belt housings and the Backplate catches under the opening in the Artisan base. The Back Plate is to keep the Housing from flipping up when the drawer is open, but the front of the housing could flip up if not careful. I would suggest NOT glueing the Backplate, as the pressure fit is sufficient and makes removal easier if necessary. Glue the handle.

While possible, it is probably not a good idea to open the drawer while the build plate is moving. Just sayin'.

I have not found heat affecting the Housing or Drawer, but have only had the build plate up to 65° C. No long-term data on the affect on the glue sticks.

If you find this useful, please let me know. Tips are good, too! P-}>