Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 175x180.38mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Purple Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Note: You do not have to use Bambu Labs filament for this print.

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #13 (1.12mm) swap to Purple At layer #18 (1.52mm) swap to Jade White for the rest.