Stackable storage boxes with honeycomb profile to save material.

Note that I created 2 different series, which vary in how they much they stack on top of each other and if smaller sized boxes can fit in a larger box. Below you find the differences and the links to the right series.

First series: Stackable boxes, box-in-box (small, medium & large) :

• Stackable: yes, but only boxes that are the same size
• Box in box: yes, 2 small boxes fit in one medium box, 2 medium boxes fit in one large box
• Follow this link: https://www.thingiverse.com/thing:6776791

Second series: this model represents this series - Fully stackable boxes (small, medium & large) :

• Stackable: yes, same size on same size, 2 medium on one large, 2 small on one medium. See pictures.
• Box in box: no

Included in this model are 3 sizes of storage boxes:

• Large: 250 mm length x 250 mm width x 125 mm height, 2.5 mm wall thickness and 335 grams filament usage
• Medium: 250 mm length x 125 mm width x 125 mm mm height, 2 mm wall thickness and 203 grams filament usage
• Small: 125 mm length x 125 mm width x 125 mm mm height, 2 mm wall thickness and 127 grams filament usage

To get you started, in the 3mf file, there are 3 plates:

• Plate 1: the large stackable storage box
• Plate 2: two medium storage boxes
• Plate 3: two small storage boxes (4 fit on a plate)

All models can be printed without any supports. Feel free to print it and let me know if you have any feedback.