##Goals

• save table space while playing
• speed up setup and gameplay
• store all expansions (until Masks of Nyarlathotep - 2018)
• store sleeved cards (PYN)
• vertical storage

##Requirements

• 3 of the big boxes (core, expansions)
• Accept to play with a variant about how to draw small cards
• 1d10

##Warning Do not tilt the cards holders downwards, otherwise the cards will fall out. This is a design choice to achieve the first goal - save table space while playing - by putting the cards holders under the game board.

##Description Put two lids of the game boxes on the table, then put the unfolded game board over them. Add another lid if you play with an additional game board. You can also create a "second floor" using the inner boxes, so you can stack decks: just remember to take out things you could need during the game! Or simply use other games' boxes.

Under the game board, put the cards and tokens holders. Each cards holder is paired with a discard pile holder: stack it over or under it. I prefer to have the discard pile above the deck, so the draw and discard movements are less hindered by the cards held vertically in the player board. You can stack multiple cards holders and discard piles of the same type.

Cards holders are slightly inclined at bottom by 1.25° to hinder the accidental dropping of cards. This means that small cards holders are not perfectly symmetrical: the bottom can be distinguished by the fact that it looks thicker. This also means that trays placed inside the cards holders are inclined too, although this is barely noticeable.

###Rule variants Assets cards are stored grouped by trait, so you can immediately individuate the one you need. If you want to draw a random Asset card then roll 1d6 and draw from the corresponding trait deck. 1 - Trinket 2 - Service and Task 3 - Ally 4 - Item - Tome 5 - Item - Weapon 6 - Item - other

Same for the Unique Assets cards 1 - Task (first half) 2 - Task (second half) 3 - Ally 4 - Trinket 5 - Item - Tome 6 - Item - other

the Spell cards 1-2 - Incantation 3-4 - Ritual 5-6 - Glamour

and the Artifact cards 1-3 - Item - Tome 2-6 - other

Condition cards are organized in the same way, plus they're grouped by name, which is visible and arranged per row. To choose a random card, roll 1d10 for the trait and 1d6 for the row.

If you think you'll need a drawing system based on better distribution, you can calculate percentages by yourself and use 1d100 (2d10).

###Box 1

• base game encounter cards
  • 3x Eldritch_Horror_-_large_cards_double_deck.stl
  • 3x Eldritch_Horror_-_large_cards_double_discards.stl
• disaster cards
  • 1x Eldritch_Horror_-_large_cards_-_single_-_low.stl
  • 1x Eldritch_Horror_-_large_cards_-_single_-_medium.stl
• devastation encounter cards
  • 1x Eldritch_Horror_-_large_cards_-_single_-_low.stl
  • 1x Eldritch_Horror_-_large_cards_-_single_-_medium.stl
• mystic ruins encounter cards
  • 1x Eldritch_Horror_-_large_cards_-_single_-_medium.stl
  • 1x Eldritch_Horror_-_large_cards_-_single_-_high.stl
• dream-quest cards
  • 1x Eldritch_Horror_-_large_cards_-_single_-_medium.stl
  • 1x Eldritch_Horror_-_large_cards_-_single_-_high.stl
• side boards' encounter cards and tokens
  • 3x Eldritch_Horror_-_large_expansions_cards_double_deck.stl
  • 2x Eldritch_Horror_-_large_expansions_cards_double_discards.stl
  • 1x Eldritch_Horror_-_exp_tray_dreamlands_1.stl
  • 1x Eldritch_Horror_-_exp_tray_dreamlands_2.stl
  • 1x Eldritch_Horror_-_exp_tray_mountains.stl
  • 1x Eldritch_Horror_-_exp_tray_pyramids.stl
• asset cards
  • 2x Eldritch_Horror_-_small_cards_triple_deck.stl
  • 2x Eldritch_Horror_-_small_cards_triple_discards.stl
• unique asset cards
  • 2x Eldritch_Horror_-_small_cards_triple_deck.stl
  • 2x Eldritch_Horror_-_small_cards_triple_discards.stl
• artifact cards
  • 1x Eldritch_Horror_-_artifact_cards_deck.stl
  • 1x Eldritch_Horror_-_artifact_cards_discards.stl
• clue tokens
  • 1x Eldritch_Horror_-_large_tray_rounded_V1.stl
• devastation and eldritch tokens
  • 1x Eldritch_Horror_-_devastation_and_eldritch_tokens.stl
• mystery, rumor, adventure tokens
  • 1x Eldritch_Horror_-_large_tray.stl
• lead investigator, doom, omen, active expedition, mythic ruins, dream-quest tokens
  • 1x Eldritch_Horror_-_large_tray.stl

###Box 2

• spell cards:
  • 1x Eldritch_Horror_-_small_cards_triple_deck.stl
  • 1x Eldritch_Horror_-_small_cards_triple_discards.stl
• condition cards
  • https://www.thingiverse.com/thing:989153
  • 12x EH-Small_Box.stl
• boards
• rules
• dice (I bought lot of extra 14mm black dice)
  • https://www.thingiverse.com/thing:1928038/comments
  • 1x Eldritch_Horror_-_dice_-_box.stl
  • 1x Eldritch_Horror_-_dice_-_lid.stl
• cubes for player boards
  • 1x Eldritch_Horror_-_cubes_-_box.stl
  • 1x Eldritch_Horror_-_cubes_-_lid.stl
• unused tickets
  • 1x Eldritch_Horror_-_unused_tickets_-_box.stl
  • 1x Eldritch_Horror_-_unused_tickets_-_lid.stl
• unused improvement/impairment tokens
  • 1x Eldritch_Horror_-_unused_improvement_impairment_-_box.stl
  • 1x Eldritch_Horror_-_unused_improvement_impairment_-_lid.stl
• cubes for player boards
  • 1x Eldritch_Horror_-_cubes_-_box.stl
  • 1x Eldritch_Horror_-_cubes_-_lid.stl
• unused game assets (tokens, cards, etc) stored in ziplocks on the bottom of the box, next to the expansions' boards

###Box 3

• monster tokens
  • a bag, or:
    • 1x Eldritch_Horror_-_Monster_Box_-_box.stl
    • 1x Eldritch_Horror_-_Monster_Box_-_lid.stl
• epic monster tokens
  • 1x Eldritch_Horror_-_Epic_Monster_Box_-_box.stl
  • 1x Eldritch_Horror_-_Epic_Monster_Box_-_lid.stl
• investigator tokens (male/female)
  • https://www.thingiverse.com/thing:5187915
  • 2x eh-A-characters-lid-2.stl
  • 2x eh-A-characters-bottom-2.stl
• Player Boards
  • https://www.thingiverse.com/thing:6801241
  • 4x all
• investigator sheets
• ancient one sheets
• ancient one cards
  • wrap using ancient_ones_bands_EN.pdf (or IT version, PSD is provided to translate it)
• mythos cards
  • wrap using ancient_ones_bands_EN.pdf (or IT version, PSD is provided to translate it)
• prelude cards
  • wrap using ancient_ones_bands_EN.pdf (or IT version, PSD is provided to translate it)
• adventure cards
  • wrap using ancient_ones_bands_EN.pdf (or IT version, PSD is provided to translate it)
• gates
  • https://www.thingiverse.com/thing:6822697
  • 2x all
• personal story cards
  • 1x Eldritch_Horror_-_personal_story_cards.stl

###Additional box I use a box to store extra components that are shared across multiple games. The one I’m currently using measures 10x10x2 inches—a size often used by Fantasy Flight Games for some of their titles or expansions. Examples include Secrets of the Order (Arkham Horror Third Edition), Beyond the Threshold (Mansions of Madness), Elder Sign, and Arkham Horror: Final Hour. That said, you can use any box you prefer—for instance, one of the large expansion boxes from Eldritch Horror that will be left empty after setting up the new three-box insert.

• Player Boards (so they're 8x counting the ones in Box 3)
  • https://www.thingiverse.com/thing:6801241/files
  • 4x all
• Monster standees
  • https://www.thingiverse.com/thing:1246029
  • 20x gray (monsters)
  • 4x orange (legendary monsters)
• Investigator standees
  • https://www.thingiverse.com/thing:1243470
  • 8x any color (each one of a different color if you want to distinguish players)
• Gate holders
  • https://www.printables.com/model/473849-eldritch-horror-and-arkham-horror-gate-stands
  • 7x blue
  • 4x green
  • 10x red

##Dice tower I designed a modular dice tower that can holds all Ancient One's cards. https://www.thingiverse.com/thing:7011381

##Printing notes

• condition cards: you can print them joined in groups of 2/3/4/etc if you do not care to divide them by colour or if you don't want to use the expansions' boxes. Alternatively, you can join them using double tape (as I did for the two ones that doesn't fit in the two expansions' boxes) or superglue.