Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
A 3D printed, weight driven pendulum clock with anchor escapement, minute hand and hour hand. Special about this clock is that all gears are arranged on one shaft and one axle.
Additional items needed to build this clock:
- Fishing line
- Weigt (for example water bottles)
- 28*10 ct coins (as pendulum weight)
- 86 mm, 65 mm and 61 mm long steel rods with 4 mm diameter
- 10*M2x18 screws, nuts and washers
- 5*M5x10 screws, nuts and washers
- Spring with inner diameter slightly greater than 8 mm and easily compressible to 4 mm
- Spring with inner diameter slightly greater than 4 mm and easily compressible to 4 mm
The mechanism of the clock is explained in the following youtube video (the video is only in german): https://www.youtube.com/watch?v=Ojrbu14cKPg
35
Curtidas
0
Downloads
17
Coleções
Tags
clock
escapement
gears
Hour
mechanical
mechanism
minutes
pendulum
Licença
Creative Commons - Attribution - Share Alike
Arquivos (22)