Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D TerminatorArm por nracmo no Thingiverse

Descrição

My attempt at an accurate movable terminator hand. I made this in Sketch up. They are named as close to actual anatomy as I can figure to help in assembly. Also 1 is thumb 2 index ect.. 1/8 in rod cut to 5/8 in pieces will hold most of it together pretty tight or you can use screws and run cables through the pulleys to make it move if you want. I am working on simplifying the construction of the model still.

For example a file labeled 2345 would be the same for index2 middle3 ring4 and pinky5 so you would need 4 of those. If there is more than one number in a file name it is a piece that is the same for multiple fingers. Example to assemble ring finger (4) you would need 2-4_proximal_phalanx, 2345_meticarpal_phalanges, 4_medial, and 2345_distal_phalanx for the main 4 pieces of the ring finger

Thingiverse

TerminatorArm

nracmo nracmo (abre em nova aba)
209
Curtidas
0
Downloads
84
Coleções
Tags
arm machine robot t800 T800 terminator Terminator
Licença Creative Commons - Attribution - Share Alike
Arquivos (50)
mm-v-3_Medial_Pulley.stl 18.8 KB
mm-v-2-4_Proximal_Phalanx.stl 66.3 KB
mm-v-Thumb_Medial_Pulley.stl 18.8 KB
mm-v-Humerus_Fragment.stl 832.3 KB
mm-v-Forearm_Support.stl 1.1 MB
mm-v-5_Lumbrical_Piston_Body.stl 61.7 KB
mm-v-1_Piston_Body.stl 28.2 KB
mm-v-3_Lumbrical_Piston_Body.stl 61.7 KB
mm-v-1_Medial_Proximal_Disk.stl 23.5 KB
mm-v-Wrist_Main_Ball_Joint.stl 741.9 KB
mm-v-2_Medial.stl 26.3 KB
mm-v-2345_Proximal_Pulley.stl 18.8 KB
mm-v-4_Medial.stl 26.6 KB
mm-v-34_Palm_Piston_Body.stl 72.6 KB
mm-v-1_Piston_Shaft.stl 23.3 KB
mm-v-Thumb_Medial-Proximal_Pulley.stl 18.8 KB
mm-v-3_Proximal_Phalanx.stl 66.8 KB
mm-v-2345_Proximal_Metacarpal_Disk.stl 23.5 KB
mm-v-2345_Proximal-Metacarpal_Pulley.stl 18.8 KB
mm-v-2345_Medial_Proximal_Disk.stl 23.5 KB
mm-v-Thumb_Medial_Phalanx.stl 38.1 KB
mm-v-Palm_Piston_Rod.stl 31.1 KB
mm-v-Lumbrical_Piston_Rod.stl 31.4 KB
mm-v-24_Lumbrical_Piston_Body.stl 61.7 KB
mm-v-Metacarpal_R.stl 44.8 KB
mm-v-Distal_Knuckle_Disk.stl 27.1 KB
mm-v-3_Medial.stl 35.9 KB
mm-v-2345_Medial-Proximal_Pulley.stl 18.8 KB
mm-v-Thumb_Proximal_Pulley.stl 18.8 KB
mm-v-5_Proximal_Phalanx.stl 51.6 KB
mm-v-Thumb_Distal-Medial_Pulley.stl 18.8 KB
mm-v-Metacarpal_L.stl 50 KB
mm-v-2345_Distal-Medial_Pulley.stl 18.8 KB
mm-v-Forearm_Piston_Rod.stl 569.5 KB
mm-v-2345_Medicarpal_Phalanges.stl 49.6 KB
mm-v-25_Palm_Piston_Body.stl 58.6 KB
mm-v-Dorsal_Forearm_Piston_Body.stl 1 MB
mm-v-Forearm_Cuff_.stl 1.2 MB
mm-v-Elbow_Joint.stl 1.5 MB
mm-v-Thumb_Metacarpal.stl 21.8 KB
mm-v-2345_Distal_Phalanx.stl 34.8 KB
mm-v-Humerus_Cap.stl 449.4 KB
mm-v-5_Medial.stl 26.9 KB
mm-v-Thumb_Proximal-Metacarpal_Pulley.stl 18.8 KB
mm-v-Wrist_Ventral_Ball_Joint_.stl 763.8 KB
mm-v-Thumb_Proximal_Phalanx.stl 37.5 KB
mm-v-Ventral_Forearm_Piston_Body.stl 1.2 MB
mm-v-Thumb_Distal_Phalanx.stl 28.2 KB
mm-v-Wrist_Dorsal_Ball_Joint.stl 604.5 KB
mm-v-Carpal_Plate.stl 199.3 KB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora