*If you make this and post on Instagram, please tag me so I can see it! @daann_ii

This a remix of the Octonana by Ferro_Giconi https://www.thingiverse.com/thing:4193641 which is a remix of Ball-joint articulated octopus by Ellindsey https://www.thingiverse.com/thing:584405/remixes

This model has been edited to make it print a bit better on FSM printers. The bottom is completely flat. No need to use brims or supports, even when printing pretty small (~40%).

I also altered the main body shape and made changes to the eyes.

This model comes in two versions. One with the original eyes and another with cutouts. At 100%, the eye socket will hold a 10mm flatback bead or you can print one of the eye models included in the files. There are a few options for eyes. I used glass cabochons and flatback beads for some of the models in the pictures. Because I made the model have a 10mm eye socket at 100%, you can scale the model and predict what size eye hole will result. Eyes will be 1/10 of body scale.

Example.
Printed at 150% scale, eye hole 15mm Printed at 60% scale, eye hole 6mm

The smallest print in the pictures (lime green) was printed at 40% and I verified that a 4mm flatback bead fits into the eye socket. Due to tolerance differences in printers, printing at large scales may result in more wiggle room in the socket, so keep that in mind. Example. If you want to use a 15mm flatback or cabochon for an eye, you may want to actually print at 148%.

This model takes approximately 3.5hrs to print at 100% scale, 10% infill. (Prusa slicer, standard settings 0.16mm layer height, Ender 3 v3 SE).

Additional information in the print settings and post processing sections.