Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Modelo 3D Parametric Diffuser Grid for WS8212B LED Matrix por Billism no Thingiverse

Descrição

This is for generating grid support for Neopixel matrices (ws8212b LED panels). The support can be 3d printed and used to hold a diffuser in front of the LED panel. I added slots on the face touching the LED matrix to leave room for the tiny SMD capacitors. If for some reason you have an LED matrix that does not expose any SMD components, you can set the "SlotsForSmd" parameter to false. You can also change the "SMDSlotShiftOffCenter" parameter if the slots on your PCB are positioned differently. There are other parameters for customization which are documented in the scad file.

More information and an ESP32 project using this grid can be see at my GitHub page: https://github.com/billism1/sand-matrix/tree/main/3dmodel

Thingiverse

Parametric Diffuser Grid for WS8212B LED Matrix

Billism

1

Curtidas

0

Downloads

5

Coleções

Licença Creative Commons - Attribution - Share Alike

Arquivos (6)

Grid_8x16_with_SMD_Slots.stl 226.3 KB

Grid_8x8_Hard_PCB_with_Centered_SMD_Slots.stl 106.9 KB

Grid_16x8_with_SMD_Slots.stl 213.8 KB

Grid_8x8_with_SMD_Slots.stl 106.9 KB

Grid_16x16_with_SMD_Slots.stl 452.4 KB

Grid_16x16_with_SMD_Slots_and_DIffuser_Layer.stl 402.4 KB

Ver no Thingiverse

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta

Comparar agora