After our wooden block set mysteriously disappeared, I decided against buying a replacement set and decided to print a new one instead, especially since the wooden set doesn't include a deep seat back which is part of our configuration.

There are two sets of models. One includes the recesses for the magnets, and another set without. Honestly, these don't require magnets as the pieces stand well enough on their own if they're sitting on flat surfaces. But do use magnets if you want that satisfying pop when they click together. =)

If you do use magnets, please refer to the polarity diagram to ensure they click together. I put a drop of super glue in first then pushed each magnet in the hole. Do not put magnets in the center holes. I learned the hard way that the wooden blocks don't use magnets in those spots. Instead, they are metal discs, not magnets, so they click to the magnets regardless of polarity.

The magnets can be sourced from Amazon and the non-magnet, metal discs from AliExpress. AliExpress was the only place I found metal discs this size that weren't magnets.

5mm x 2mm magnets: https://a.co/d/374ksQQ 5mm x 1mm metal discs: http://tinyurl.com/2bf94k6f

Stay tuned for angled sides, drink holders, and table models. Coming soon!

Update 2/22/2024: Added angled seat back and angled deep seat back models.