Remixed version of emancarrillo's Kinetic Box / Moebious Kaleidocycle inspired by Degrees of Freedom.

What I've altered or modified:

• Resized the cube to 70mm edge length
• equalized the thickness of side and bottom pieces
• Added surfaces on the open side of the cube to safely stand on at 45° angle
• Added slots to insert M4 standard nuts as thread on the individual pieces
• Changed the screw holes to M4
• Changed the screw holes to take countersunk head screws
• Changed the magnet openings to accomodate 6x2mm standard magnets
• Magnets are firmly inserted and won't need to be glued
• Changed the geometry of some edges of the surface pieces to allow them proper movement without grinding against each other while allowing for a more precise closed fit

What you will need to assemble a Kinetic Box:

• 3x Base piece
• 3x Side piece
• 6x M4x20 Countersunk head screw
• 6x M4 standard nut
• 6x 6x2mm magnet

Upon assembly, be gentle with the torque on the screws. Otherwise, your kinetic box may remain closed or seize.