⚠️ I have not tested the project at the moment, It is just a week-end fast drawing

⒈ Inspiration :

Quite a time ago, I saw Alexandre Chappel (link : [https://www.youtube.com/@achappel](https://www.youtube.com/@achappel)) video of custom drawer organisation. I liked the idea and wanted to create a project like this. Original video : [https://www.youtube.com/watch?v=CHFK5sY8ToE](https://www.youtube.com/watch?v=CHFK5sY8ToE)

While looking for a cost table, I remembered the cheap workshop cabinet. One of those cabinet costing less than the drawer rail for the build, I wanted to use them.

Pros :

• Metal
• No building needed (almost)
• Cheaper

Cons :

• The grid for the drawer is not perfect

2. Project presentation

• My design is based on a cheap cabinet, that we can found on many websites for around 120€ delivered in France. The one I based my design on use 5 drawers, with a size of 500x280x95mm.

• To lock storage in place, I used the same technic as Alexandre, a grid with a size of 10x5.6 squares. Each square having a size of 50x50mm.

• The grid taking 3mm of high in the current drawing, we are left with 92mm of usable hight.

3. Possible customization

• Currently being a project I have not yet tested, I'm giving to you all the drawings and STL as is.
• Drawing are based on parametric function. You can use the given obj files, or modify easily the F3D files.

4. Printing tips and choice

- I advise you to download the zip file where everything would be organized in folders - For one drawer, The grid is composed of 10x5.6 square for a total size of 50x28cm. To complete the grid I tried to make it printable on most common printer. Therefore I cut the design to multiple parts such as you have to print : -> 2* « 4x1.6 » -> 2* « 4x4 » -> 1* « 2x1.6 » -> 1* « 2x4 »